Having Said That

These units are board level repair and they have a self-diagnostic function. The information listed below came from the 42PD5000 manual, but I suspect it is very similar to your unit. To active this function you first turn it off (master power on in stand-by) then on the plasma you push and hold the (sub) power button and the down arrow at the same time and hold them for 5 seconds after it comes on. this will activate a series of red LED flashing a code. The code will blink 1/2 second on, 1/2 second off till the total count is done then it will stop for 2 seconds and repeat. Any other function button will stop the diagostics. One blink maybe the Logic board, two blinks the X-Sus board, three blinks maybe the Y-Sus or the Scan driver module (SDM), four blinks maybe the X-Sus, Y-Sus, SDM or the Power Supply (PSU), five blinks maybe the ABUS, the Address driver module (ADM), or the PSU, six blinks maybe cause by the ADM temperature, and eight blinks maybe “all the above-mentioned boards. I have seen a lot of the Y-sus board and the PSUs. This should at least give you an idea of what to expect. Note: as you may notice these codes are very vague and and seam to overlap a lot. That’s why repairing these units sometimes is very difficult. And difficult usually means more money. Good luck, and don’t take it to the Mom&Pop repair facility, take it to a Hitachi authorized repair shop in your area.

MOUNT, HITACHI MOUNT FOR CPD10

DEWALT DW7231 Miter-Saw Workstation Tool Mounting Brackets $32.67 Designed for use with the DW723 Miter Saw Workstation, these DeWalt DW7231 Miter Saw Workstation Tool Mounting Brackets feature non-marring feet on the tool mount that will not scratch material….

Amvent 12000 BTU (1 Ton) Ductless Wall Mount Mini Split Room Air Conditioner (AC) Conditioning Cooling System Unit + Free Shipping + Free Installation Kit $1,349.99 Amvent Ductless Mini Split Air Conditioning Systems are a powerful & flexible way to efficiently cool a room. Each system has two parts: an indoor unit & an outdoor unit. The indoor unit is mounted using a bracket – like a picture frame – on an exterior facing wall, then connected to the outdoor unit using a small hole drilled through the wall. Electricity is supplied via a 20 Amp Breaker (not sup…

Amvent 24000 BTU (2 Ton) Ductless Wall Mount Mini Split Room Air Conditioner (AC) Conditioning Cooling System Unit + Free Shipping + Free Installation Kit $1,159.99 Amvent Ductless Mini Split Air Conditioning Systems are a powerful & flexible way to efficiently cool a room. Each system has two parts: an indoor unit & an outdoor unit. The indoor unit is mounted using a bracket – like a picture frame – on an exterior facing wall, then connected to the outdoor unit using a small hole drilled through the wall. Electricity is supplied via a 20 Amp Breaker (not sup…

Hitachi Projectors Wall Mount for iPJ-AW250N Ultra Short Throw Projector The Hitachi Wall Mount for iPJ-AW250N Interactive Short Throw Projector features an adjustable arm that lets you easily change the distance between your projector and screen. The arm attaches directly to any wall with the mounting plate. Compatible with Hitachi’s iPJ-AW250N interactive projector….

Hitachi CP-A100 XGA 2500 Lumens 12.8Lbs Ultra Short Throw 3LCD Projector $1,875.00 The revolutionary Hitachi CP-A100 3LCD projector features a very short throw distance, eliminating the problem of presenters obstructing the projected image by standing in front of the screen. Additionally, the CP-A100 offers networking capability, allowing multiple projectors to be controlled and monitored from a single location.The CP-A100 boasts an extremely short throw distance; at 1.4 feet yo…

VideoSecu universal projector ceiling mount for sony dell epson lcd dlp projector PJ2W 1CA $39.99 Fits Epson, Dell, 3M, ACer, BenQ, Canon, Universal mount features a flexible mounting system that can be used with most projector model, and it has the versatility to attach to most ceiling or wall. The mounting interface features four double-jointed support arms that allow flexible positioning to reach mounting point of the projector. Each arm can be precisely positioned to avoid covering importa…

Cheetah Mounts APSAMB 32-55 LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt & Swivel Articulating Arm for Flat Screen Flat Panel LCD LED Plasma TV and Monitor Displays Includes Free 10′ Braided High Speed HDMI Cable With Ethernet $31.90 The APSAM universal articulating arm mount supports virtually any display up to 55″ with hole patterns up to 27.7″ horizontally and 19″ vertically. The APSAM also features a full 27″ of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5″ profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation an…

Designer Habitat PREMIUM TV Wall Mount for 33 – 60 inch LCD, LED, or Plasma Flat Screen TV – Super-strength Load Capacity 175lbs – 15 Degree Tilt Mechanism Up & Down, Max VESA 660×450 – Free Bubble Level $19.90 Don’t risk your TV with the thinner cheaper models! This wall mounted bracket is the strongest around and is designed to fit flat screen LCD and Plasma style TV’s between 33″ and 60″. The bracket is a universal model and designed to fit all of the major manufacturer models. The bracket also includes a unique tilting mechanism which can be used to angle the TV up and down by 15° to ensure you have…

Cheetah Mounts AS3B 3 Component Shelf Wall Mount Bracket for LCD TVs $29.50 The AS3B is a tri-shelf cable management system. It can be used with or without a Plasma/LCD mount. This unit is designed to fit under your display and provide an on wall solution for other components such as cable boxes, DVD players, game consoles, and stereo components. There are three 2.25″ holes on the aluminum plate that allow you to cleanly run your cables up to your TV or down to another co…

Wall Arm for AW250N Proj $270.99 MOUNT, HITACHI WALL ARM MOUNT FOR…